AMBROSIA ABS Matte Filament of the Gods – 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament

When West3D originally opened its doors, we had a filament we loved. Over time, the love waned as corners were cut and quality diminished. Released in December 2024, Ambrosia Filament’s line of ABS is the rebirth of some darn good ABS.  

This filament, unlike our Uber ABS+, has no additional polymer additives that impact printability or material properties. The resin was specially selected and has a track record of being printable and having a great surface finish. This paired with our quality standards reinvents this storied ABS filament. 

Feed your Printer the Filament of the Gods.

Derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you’ll experience consistent extrusion throughout the spool. 

ABS Filament (Acrylonitrile Butadiene Styrene) is one of the most popular 3D printing filaments around, used in a variety of applications including industrial/engineering. It is a filament that handles bridging really well, and offers a great combination of strength and durability making it the first choice for more practical 3D prints (over PETG or PLA) that require tougher longer lasting items that can withstand greater temperatures. ABS can be smoothed using acetone, making for strikingly smooth parts.

This filament is a great all around filament when you need strength, durability, and the ability to withstand heat. This filament performs exceedingly well for an ABS, however because it’s an unadulterated resin it is still recommended to print in an enclosure. A heated bed is required. 

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Derived from 100% Virgin (Grade-A) non-toxic pellets
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight: ~130g

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (here).

 Ambrosia Filament’s Recommended Print Settings for our ABS Matte filament:

Technical Specifications for our ABS Matte Filament (pending review):

Note: The HDT value is based on 1.8MPa (261 psi) standard tests for other filaments were measured at 0.455 (66 psi), roughly 4 times the stress level. Because of this, and without further testing we cannot provide a figure, but expect the HDT to be significantly higher than 88C (one plastics site we found suggests 98C). 

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.